China Manufacturer · Pneumatic Handling

Industrial Pneumatic Manipulators — China Manufacturer for 40–500 kg Handling

Air-balanced handling arms for automotive, aerospace, wind power and machine tending. 40–500 kg payload, air-failure lock, factory-direct supply with OEM/ODM support.

  • Factory direct
  • OEM / ODM
  • Export-ready
40–500 kgPayload range
≈2000 mmWorking reach
0.6–0.8 MPaClean air supply
Air-failure lockSafety standard
What is an industrial pneumatic manipulator?

An industrial pneumatic manipulator is a compressed-air-balanced handling arm that offsets the weight of a workpiece or tool, letting one operator position loads of 40–500 kg with low manual effort. Unlike an electric robot, it keeps the operator in direct control and needs no programmed automation cell.

Choose by payload and task

SeriesModelRated loadWorking radiusVertical strokeTypical use
LSLS4040 kg1,800 mm860 mmTool support
LSLS6060 kg1,900 mm930 mmWorkpiece handling
LSLS8080 kg2,000 mm1,000 mmEnd-effector modules
LPLP6.5 / LP14 / LP2165 / 140 / 210 kg—1,500 / 2,010 mm liftPneumatic balancer
LSSLSS200 / LSS500200 / 500 kg2,500 mm span≤2,600 mmHeavy components
PSCustomup to 800 kgConfigured to workpiece and stationNon-standard

Note: 800 kg is a non-standard PS engineering capability, not a catalogue model designation.

Built for real factory stations

Automotive

Parts handling and positioning

Aerospace

Component assembly support

Wind power

Bolt and flange alignment

Battery

Pack and module transfer

Machine tending

CNC load and unload

Sheet metal

Blank and panel handling

Factory-direct, configurable, export-ready

Design, machining and assembly are handled in-house, so arm reach, lift stroke, mounting form and end-effector interface can be matched to the actual station. Typical lead time is 4–6 weeks after order confirmation, depending on configuration and quantity. MOQ is 1 unit for standard models; non-standard projects are quoted separately.

Pneumatic manipulator vs other options

OptionPayload fitPositioningCost profileBest for
Pneumatic manipulator40–500 kgOperator-guided, fine inchingMediumMulti-variety manual-assist stations
Electric hoistWidePoint-to-point onlyLowSimple vertical lifting
Industrial robotMediumProgrammed, repeatableHighFixed high-volume cycles

Safety is a design input, not an accessory

Air-failure lock

On air supply loss, the lift axis locks to prevent free fall.

Overload protection

Load limiting with anti-rebound mechanical brake.

Controlled descent

Optional air receiver allows a controlled lower after lock.

Two stations, two configurations

Wind power · yaw-caliper assembly

A yaw-caliper assembly station at a wind-power equipment manufacturer in north-west China previously needed two devices: one arm to lift and position the caliper, another to support the torque tool for bolt tightening. Both operations now run on a single LSS arm.

10+units delivered
2 → 1operators per station
−50%+assembly time
Heavy-duty manipulator at a wind-power assembly station
LS60 pneumatic manipulator holding a heavy cylindrical component

Tightening stations · LS60 holds the part, the tool applies the torque

On a 60 kg LS60 arm, heavy cylindrical or ring-shaped components are held in a floating, balanced state. The operator aligns the part with one hand and keeps it steady while the joint is tightened, so the weight stays on the arm instead of on the operator's shoulders and wrists. The same configuration is used across hydraulic torque wrench stations in wind power, petrochemical, rail and heavy machinery workshops.

60 kgrated load (LS60)
Balancedfloating hold
1operator

Customer identity and contract details are not disclosed.

Ten station types we configure for

Compiled from workshop practice at hydraulic-torque-wrench stations. The final configuration depends on bolt size, torque and access at the station.

IndustryWorkshop stationBolts / jointTool type
Wind powerNacelle assembly, gearbox / main bearing, blade-root flange, tower flange, yaw & pitch bearing re-torqueM32–M42 HSHollow + drive hydraulic
PetrochemicalBOP assembly & overhaul, heat-exchanger covers, pressure-vessel / reactor flanges, valve flangesM36–M64Hollow hydraulic
Power generationTurbine cylinder, generator end cover, hydro units, transformer flanges, HV switchgear, boiler manholesM32–M48Hollow + electric torque
RailBogie assembly, wheelset press-fit, traction motor, gearbox, body connections, brake modulesM32 / M36Drive hydraulic + heavy electric
Trucks & trailersAxles, hubs, suspension, flywheel housing, gearbox flange, frame, final driveM30–M36Drive hydraulic + electric
Construction equipmentBoom pivots, slewing rings, travel gear, main valve flanges, engine mounts, reducer flangesSlewing ring / pinsHollow + drive hydraulic
Marine & offshoreMain engine cylinder heads, gearbox, shafting flanges, deck equipment, ballast valvesM36–M64Hollow hydraulic
Metallurgy & miningMill housings, reducers, crushers, ball mills, sintering equipment, roll flangesHousing / mill flangesDrive hydraulic
AerospaceEngine casings, landing gear, fixtures, test rigs, large structuresCasing / rig boltsHeavy-duty torque
Steel structuresBox girders, large frames, vessel shells, test stands, tower-crane nodesHSFG final tensionHollow + electric torque

Frequently asked questions

What payload range do you cover?

40–500 kg across the LS, LP and LSS series. 800 kg is an engineered non-standard capability.

Do you support non-standard fixtures?

Yes. End-effectors and arm geometry can be configured to the workpiece.

What air supply is required?

Clean compressed air at 0.6–0.8 MPa.

What happens if air pressure is lost?

The lift axis locks to prevent free fall. A controlled descent is possible with the optional air receiver.

What is the lead time?

Typically 4–6 weeks after order confirmation, depending on configuration and quantity.

What is the MOQ?

1 unit for standard models. Non-standard projects are quoted separately.

Can you ship to our country?

Export-ready packaging and documentation are provided. Please confirm local requirements with our team.

How do I get a quotation?

Send workpiece weight, reach, stroke and station details through the form on this page.

Tell us about your station

Share the workpiece, reach and station conditions. We reply within 1 business day.

Individual or workshop name is acceptable.
WhatsApp number works too.